Home page

Video quality The size Download


Date of publication
Downloaded once 0

Full video

 Full HD 1080p — 1920х



Ling Ling
What about fiberglass arrows
Comment from : Ling Ling

hafza macie
You can use woodprix instructions to build it in the cheapest way.
Comment from : hafza macie

Fighting Arts of England
Make your own, it really is easy, take your time to get a few tools and get going, I make wood and bamboo arrows. www.youtube.com/watch?v=ar0VGsmFD2I
Comment from : Fighting Arts of England

The Amazing Goldfish
I have a approx 30 pound draw bow that seems to be shooting great with 31" arrows 350 spine and 100 grain tips. QUESTION: Does the distance to target also effect the flight?
Comment from : The Amazing Goldfish

Thomas  Broking
Very informative. I remember going to the sporting store after having to scrounge up 75 cents, to buy an arrow. It was wood with a field tip. There weren't many choices, wood with 3 types of head. Or the aluminum with replaceable heads.
I would go to grandparents house for the weekend. I found the twine the newspaper was tied up with, grab a Bowie knife, got cut down twigs to make arrows and a bow. I kept busy, had a blast, and 90% of the time my arrows were cut there, no point, no knock, all carved. No feathers at all. I could dent a beer can 30 feet away pretty consistent. Great fun.

Comment from : Thomas Broking

Haha. I"m a relative beginner and lately have been trying to make sense of the arrow charts that are online. I'm a scientist with advanced degrees and over 50 publications in highly regarded medical journals, and I still have trouble with those arrow charts. Finally, somebody told me the other day all the info that I really need at this stage: If you have a lower draw-weight bow, you should use relatively less stiff arrows. If you have a higher draw-weight bow, you should use relatively stiffer arrows. Duh.
Comment from : eqlzr2

Chris LeeWoo
What brand of silver arrows would you recommend?
Comment from : Chris LeeWoo

Mark Dezuba
Comment from : Mark Dezuba

Has anyone ever tried greasing the arrow shaft so it'll fly easier through the air with less resistance?

I'm Joking!

Comment from : edstar83

John Nelson
Thanks for this knowledge bro👍👍
Comment from : John Nelson

Nubian Emporer
Does draw leg nth matter on a recurve bow?
Comment from : Nubian Emporer

I'll stick with my 2317's.
Comment from : eric1138

IamNobodey 999999subs
3:51 arrowhead on both sides of arrow
Comment from : IamNobodey 999999subs

What about the dif between 6/7/8mm thick sensei? I'm a newbie
Comment from : RGoh

Ginni Diaz
I noticed that arrows are being made from bamboo...thoughts?
Comment from : Ginni Diaz

John Colley
i prefer wood.Always wood,coz i'm a traditionalist
Comment from : John Colley

Cyprian Guerra
NUSensei, have you played Kingdom Come: Deliverance? Do you happen to understand the different types of arrows and bows there in context of how close these are to reality?
Comment from : Cyprian Guerra

Maria Hopkins
I ❤️🏹
Comment from : Maria Hopkins

Petter Bruland
Also going from plastic/rubber fins to "feather" you get more accuracy, as the feathers compress when leaving the riser, vs rubber/plastic kind of kicks the back end out a bit.
Comment from : Petter Bruland

Petter Bruland
The cheaper arrows on Wish are actually not very good, unless you got a 60lbs bow and got the muscles to pull and shoot. I bought 60 arrows all different sorts of cheap Wish arrows and initially thought they were OK. But then I got a 6 pack/$80 arrows, and my mind was blown. Now the grouping of arrows are within 8"-10" more or less with an outlier here and there, vs. before with cheap arrows where "yay I hit the wall" was "good" .... Invest in some good arrows, you will not regret.
Comment from : Petter Bruland

I like to make my own arrows. At least i know i have something i cant trust is good.
I use 11/32 shafts spined correctly for my bow. I always buy the parts by the same person. I started with carbon arrows. But it happend occasionally that someone else's arrow would shatter my arrows and it would make a mess and you would cut your hands trying to clean it up.

I used to buy my arrows made out of wood €7 per piece laminated and very durable. But i can make 10 arrows myseld for around €45 euro. Which is a lot cheaper than €70 euro. And with some special oil I make them environment resistant. And when i buy the glu i can make around a 100 arrows with it which drops the price by another €10 euro.

Comment from : Alexander

I buy arrows from tournaments.
trust me, they have the best. ( for me)

Comment from : floweringmywaters

James Gretsch
NUSensei, I've purchased plenty of low cost arrows from eBay and Aliexpress (China direct) and they are never spined right. I gave up and now purchase locally from an archery shop or from Lancaster Archery here in the US in Pennsylvania. Better to pay for decent higher priced arrows than cheapy ones direct from China. I'm sure the more expensive are made in China but they are still held to higher standards and consistency when you pay for more expensive name brand arrows.
Comment from : James Gretsch

Great explanations, as usual!
Comment from : MrEye4get

DoomBringing Gamer
what point is he using????????????????????????????????????????????
Comment from : DoomBringing Gamer

This video needs to be updated ASAP
Comment from : Brian

Nae Catalin
I like carbon arow
Comment from : Nae Catalin

Luke McMullin
Hi, I have a question, has anyone tried the 30 inch carbon arrows made by GPP that sell for $29.00 a dozen?
I have heard a lot of opinion but I would love to see someone review them and show why they are garbage or not.
I am buying a black hunter because you had the balls to shoot one and review it honestly. Too many people look at the price and say OH their Crap...

Comment from : Luke McMullin

how about the wooden arrows?
Comment from : Yoziey

Jaime The One
What about wooden arrows?
Comment from : Jaime The One

scRam Jet
Ima just sharpen my dowel and add duct tape at the end. Maybe stick a nail too
Comment from : scRam Jet

Hussein Hammoud
What would be a suitable arrow for a 30# 56” Mandarin Duck Phantom Takedown Recurve Bow? (Beginner Level).
Comment from : Hussein Hammoud

what bow do you have and how many pounds do you have?
Comment from : THE NIGGA CHIN

Hey NuSensi, I'm just getting back into archery after a 30 year break, I'm 64 now ( I used to hunt with a compound back then). I recently bought a wooden recurve rated at #15, I have a 28"draw...I need a recommendation on what spine arrows to use carbon & aluminum. Nothing is etched in stone...I need a good starting point rather than wandering through the insane amount of choices.I'll worry about price later...I trust your judgment, I really need a good place to start, can you help me, Thanks for your time.
Comment from : FumioFunakoshi

Vladimir mehic
i found perfect arrow for me by big fat luck. 33 inch long, spine 700 on 38# on my draw length . Maximal carbon edge spine.
Comment from : Vladimir mehic

Jack Kraken
What about explosive arrows, and arrows with sleeping gas?


Comment from : Jack Kraken

lone wolf ink works
I shoot aluminium Easton 2117 but I'm a hunter like the heavier arrow I feel it hits harder but that's a personal opinion could be wrong
Comment from : lone wolf ink works

arrows are arrows
Comment from : sam

Justin Finn
I'm probably getting a bow tomorrow
Comment from : Justin Finn

Mr Snuffles
Hi can I get some help. I'm after aluminium arrows as shoot on a school field. My draw weight is between 26/28lbs and a draw length of 28". What is best spin? Think I was told 1416 or 1616!
Comment from : Mr Snuffles

Mini PT
Decathlon:carbon arrow 3.50$ and aluminium arrow is 6,95$....
Comment from : Mini PT

hey, NUsensai. i have been having trouble finding the right arrows for my new bow. i am a beginner and as you mentioned i am one of those that is going to be in the garden/woods to practice shooting. i went to Hungary recently and found this awesome Hungarian horseman bow that was specially made for this small store, it is made from fiberglass covered in leather and is 133cm in length, i couldn't buy arrows since they would been taken from me at the airport. I have been trying to find the right arrows and meanwhile, trying to teach myself all about what i need to know. do you have any recommendations on stiffness, length and etc and where i could buy such arrows? it would mean the world to me, since i am gaining no luck in choosing the right ones.
Comment from : SimplyFaboulusDIY

Ano N. Ymous
So I guess high-end carbon arrows are like spitzer bullets and aluminum arrows are like slugs?
Comment from : Ano N. Ymous

Justin Valerio
Hi NuSensei. I am a recurve archer from the Phillipines. I am wondering if arrows should only be cut to attain a whole number value such as 29",28",31",32" from point to nock. Because charts only show whole numbers. Is it possible for an archer to have a 29.5", 28.1/3", 27.3/8", 31.1/5" arrow measurement from point to nock? How does it affect the spine?

Thanks in advance and more power to your channel.

Comment from : Justin Valerio

Hagi Pilo
Hey Sensei! i have a question for ya, im a begginer compound archer and i train on my own , i bought a compound bow which came with 6 Carbon arrows .
if i have Aluminium arrows who are the same length as my Carbon arrows can i use them with my compound bow ?
i know that arrows usually need to match the bow in order to not Damage the bow wings (because of differences between the weight of Carbon and Aluminium arrows
what should i do?

Comment from : Hagi Pilo

Aaron Wright
what is that thing you pull at 6.06 min?????
Comment from : Aaron Wright

Jetli _Notme
Hi NUSensei, thank you for your sage advice, I've learned quite a bit from your videos. I decided to try my hands on a recurve and purchased a 62" Samick Polaris - 28lbs(28.5" draw length). Due to budget constraints, I had been using some old carbon arrows (Browning Boss 55/70) which are way over spined, but fine for my old compound bow. I would like to purchase some proper arrows to tighten my shot groups and not develop improper targeting habits compensating with stiff arrows...what do you suggest 900, 1000 spine? Thank you in advance!
Comment from : Jetli _Notme

Epcot lp
No talk of feathered fletching?
Comment from : Epcot lp

George Allen
have you done a robin hood
Comment from : George Allen

Sam Flower
Nice Green Arrow ref bro
Comment from : Sam Flower

Lalit Madan
you have a good experience make a video on Hoyt Quattro
Comment from : Lalit Madan

Swag M8
What does fletch mean?
Comment from : Swag M8

Matthew Morris
Hi Sensei, could you make a short video solving the mystery of the different lengths that fetches come in? i.e. when you would use a long vane and when short? What is better? Are some just for compound bows?
Comment from : Matthew Morris

Matt Terry
Super helpful. As are all your vids. Thanks!
Comment from : Matt Terry

Pat Baldridge
Hi. I love your videos. I'm a relative newbie. Samick Polaris, 22lb draw weight. I'm using 28 inch carbon arrows with 1000 spine. I only have three and want to get more arrows. Should I stick with more of the same, or is it OK to have different kinds of arrows in your quiver. Went to a local archery shop and they recommended aluminum. Is it bad for a newbie to have a mix of different arrows? Thank you.
Comment from : Pat Baldridge

Sinyo Sky
Hello NUSensei... I have 30lbs Axiom+L set bow...
Can you suggest me what arrow stiffness for my bow?
I've read some tips that 400 arrow spine is correct for my bow setup, is it true?

Comment from : Sinyo Sky

Vedant Shahdeo
Easton Navigator FMJ? I shoot outdoor target at 50 meters. Right now shooting with X10 550 but now need cheaper arrows because i have already spend a lot in v-bar and short rod. Please tell about that arrow although it is obsolete now. price is 18 AUD fully fletched per shaft. Kindly reply.
Comment from : Vedant Shahdeo

Sebastian Izquierdo
教えてくれて有難う御座いました!I have a disabled brother that is starting archery so I'm helping him figure it all out, this is so much more helpful than the other videos I've seen. Thank you so much for your efforts, cheers from Chicago in the US!
Comment from : Sebastian Izquierdo

Hi @NUSensei,

Thanks for your review. I've got a W&W Black Wolf 62" recurve @60lbs. Any recommended shaft and broadheads for hunting?

Look forward to hearing from you.

Comment from : Imanoff

Daniel Archery
Easton apollo ?
Comment from : Daniel Archery

Great vid mate.Recognised the Abbey archery web pages.Great Archery store.
Comment from : RICK

Messkom Vertriebs GmbH
Ich look your videos and they are very good.
Can you make a video to explain the static and dynamic spine value?
That is a complex theme.
Also what happens if I short a arrow.
Is the spine changing or not? Because the spine is measured between to point which are 28 inches apart.

Comment from : Messkom Vertriebs GmbH

Better to bend than to break
nice video. I am a newb and I want to buy a compound bow. And I saw prices ranging from 300 $ to 2.500 $ . do you know whats the difference?
I do practice often with a recurve bow but it has a very light draw weight like a toy, I would say 5kg or less.. I want to try the big boys.

Comment from : Better to bend than to break

what is the difference between alluminium arrow and carbon? and which one do you prefer?
Comment from : derotta1

A. T. Hawke
What spine would you recommend for a recurve with a draw weight below 30lbs? Are spine measurements consistent from brand to brand?
Comment from : A. T. Hawke

mike little
as a hunter I prefer wooden shafts, many reasons for this and some are,,,they are inexpensive, amiss is not a worry if they are cheap, but i dont plan on being far enough away to miss,,,,, they are heavy ,so with my 55-60 pound compound or recurve or longbow at 20 mtrs they are going all the way through,, they are easy to tune to your bow so a lot less troublesom tinkering before a hunt,,,,,thats my two cents anyway.
Comment from : mike little

What's that Slingshot thingie you show at 6:07 ?
Comment from : Sheepy007

eric fiumanò
Ace shafts are not the lighter ones. There's plenty of full carbon shafts costing 1/2 or 1/3 than Ace and have quite the same gpi
Carbon Victory Vap v6 400 spine is 6.8 gpi= 9 € (nock and instert included)
Easton A/C Pro Field Shaft 420 spine is 7.5 gpi= 25 €
Easton A/C/E Shaft 400 spine is 7.5 gpi= 21€

from www.archeryonline.it/catalogo.asp?scat=5&cat=55&pg=3&q=

Talking about wheight is not a point

Comment from : eric fiumanò

Elliot Stjernqvist
Do you think a easton jazz 1716-1816 spine would work for a 30# bow. I just started archery recently and im now joining a target club. I need a arrow that flies straight and is relativly cheap. Would they work?
Comment from : Elliot Stjernqvist

I think you forgot to mention that some are able to handle more bow poundage than other ones... 😉
Comment from : amiraras

Elliot Stjernqvist
Hello i need some advice. Im a beginner target archer and i shoot a 30# bow. Im not sure of ny draw lenght but the arrows i have right now are 30 inches and they work fine. Now im buying some new ones and i would like to know what type and what shaft. These numbers for shaft hardness or something is confusing. Could you give some advice pls.
Comment from : Elliot Stjernqvist

can you do a video on vanes and feathers and long vs short or low profile vs high .
Comment from : WV591

I get the impression that you feel Aluminum arrows are inferior to carbon and carbon composite arrows. in some cases this may be true, but you cannot discount arrows like the Easton X7, X23, and X27. These are the top tier in arrow straightness tolerance and weight/mass tolerance. Even the vaunted X10 cant match them.
Comment from : wolfchild71

Michael Fisher
I am in my first months enjoying target archery. I have learned more from your videos than from anywhere else. Thank you so much. If you could can you talk about the different types of nocks, and what each purpose is for?
Comment from : Michael Fisher

David Crosswell
An item you didn't cover: two, three, or four vanes?
And why?

Comment from : David Crosswell

Ikuw_ S
Hello Nusensei , I have a wooden handle it is okay if i use a fiberglass arrows ?
Comment from : Ikuw_ S

Nicole Hatcher
do you do any videos on Horse Bows?
Comment from : Nicole Hatcher

Mike Gibson
archery is more instinct than technical ability.
Comment from : Mike Gibson

Red Foo
I have a 20lb bow and I am shooting a 50-70lb. Is that going to affect anything?
Comment from : Red Foo

Thanks much! I appreciate your efforts.
Comment from : DougsterCanada1

Richard Bragg
I use wooden arrows from my recurve.  Just back from a training course and noted my wooden arrows launch faster that aluminium but will likely slow more over range.  Also, not affecting my turkey feathers, it was noted that different pigments in fletchings can affect how they behave so recommended having same colour all round.  Then spent most of the course shooting bare arrows so most others had to strip fletchings off.  Again my lower cost aluminium or wood less affected so not something I needed.
Comment from : Richard Bragg

Andre Nathan
i have 22 lb bow, i currently using easton tribute 1616 shaft which worked fine "very well for me"
but everyone is using the same one in here which make it quite confusing when theres 2 people shooting at the same target, so i want to have an arrow with different vane color

which shaft number i should get?
did you recommend getting feather fletch?

Comment from : Andre Nathan

Fred Aron
As I mostly do 3d shoots and target, I found out fast that with my traditional bow, which I shoot feathered carbon arrows, a miss , nicking a tree, or a root is never an issue.  With my compound bow I have always shot aluminum, and if I hit anything denser than foam targets (target frame, target stake, target pin) I have a bent arrow...or damaged.  I am quickly finding that carbon, while maybe twice the price for a comparable arrow, is the better idea!
Comment from : Fred Aron

Bunta Yaj
And here I am shooting Poplar wood dowels from Walmart lol.
Comment from : Bunta Yaj

Great video and really helpful. Good job and thanks.
Comment from : Tfinder10001

Thanks for the tips mate =]
Comment from : didimau1

I am looking into new arrows myself. I have three choices I was looking into, but not sure.
1: x10s
2: Easton; Carbon ones
3: Carbon express SSTs.
I would choose teh x10s however they seem to cost way more then I wiosh to spend at this time. Do you suggest any of teh other two or have other suggestions?

Comment from : Hades

love your videos, just got into archery got a 34# bow recurve, i followed your advice and not to over pound my draw weight. i pull  28 inches so i got 30 inch arrows, cheap  i  know,  but great fun, just bought my son a bow as well, he is 10 so i got a cheap one just to see if he likes it for his birthday. i signed up for a course in bury, greater Manchester England. bowman of overdales for April 
Comment from : Mulberry2000

Ivo Breeschoten
Lol i have those purple arrows an the nocks keep braking
Comment from : Ivo Breeschoten

David Krowa
can you go more into detail?
Comment from : David Krowa

Matt K
I tried buying arrows the other day online and it was the most confusing thing ever so I gave up.  I am a first timer looking for a 28" arrow to shoot off of a samick sage.  Can you help point me in the right direction for what to get on a budget?
Comment from : Matt K

I admired that practice draw device you used in the video. It had a handle and an elastic stretchy plastic rubber band part. 
What are they caled and where do you buy them? I'm in the USA

Comment from : Danvil

Can't help but notice you are using Abbey Archery website for referencing arrow prices, where you located, I shoot for AAC club in Perth :D
Comment from : Darkyin

Hello, I have a asian recurve bow with a 31 inch draw.  I am about to buy some Easton Beman Bowhunter carbon arrows feather fletched at spine of 340.  They come in 30 inch and 31 inch.  Ideally (in terms of physics), what should be the length of the arrow, 30, 31 or 32 inch?  Thanks
Comment from : Chase

Must the arrows have feather fletching, when shooting a trad bow off the hand?  Thanks
Comment from : Chase

Mehrdad Semsar
hey man, really enjoying your videos. Need your advice on few issues. is there any chance that i can contact you via email?
Comment from : Mehrdad Semsar

Suzanne Morrow
Love this...I have been shooting Traditional for a few years now...Thank you  for your time and knowledge.
Comment from : Suzanne Morrow

0:55 Abbeyarchery.com.au :D
Comment from : benahhx

so got a new bow coming, which is heavier than the previous bow, I'm guessing i have a few days to find new decent priced arrows before all the ones i have now are broken lol 
gawd where do i start :D

Comment from : Darkvine

Joshua Bouse
Haha, these ignorant Americans (I'm American) don't know that aluminum is spelled aluminium in Great Britain.
Comment from : Joshua Bouse

Related videos